Difference between revisions of "Hosted/10000074"

From ATXHackerspace

Jump to: navigation, search
m (Cddunn moved page Hosted/10000078 to Hosted/10000074 without leaving a redirect)
Line 2: Line 2:
  
 
{{GrizzlyMillNavBox}}
 
{{GrizzlyMillNavBox}}
 +
[[Image:Grizzly_G8689_Manual_Mini-Mill.jpg|400px]]
  
For training on this mill, contact [mailto:director@daringRandD.com Andy Darling]
+
This mini-mill is to be used primarily for metal or plastics. Special instructions are needed if using this mill on steel. Please discuss the necessary precautions involving steel as a material with the owner, [mailto:director@daringRandD.com Andy Darling], if you need to work steel for a project. Do not use on wood.
  
 +
''See also: [[Hosted/10000023 | Taig Mini-Mill]]''
 +
 +
=== Requires Owner Approval to Become Qualified for Operation ===
 +
 +
If you would like a class on operating the mill, please contact the owner, Andy Darling. If you are interested in using the lathe and feel you have prior qualifications, you must apply for approval to the owner, [mailto:director@daringRandD.com Andy Darling].
 +
 +
=== Features and Specifications ===
 +
 +
Features:
 +
 +
    Dovetail column
 +
    Safety shut off switch
 +
    Adjustable depth stop
 +
    Fine feed head control
 +
    Geared drive
 +
    Clear guard on spindle
 +
    Rubber chip guards on ways
 +
    Zero setting dials read in inches
 +
    Adjustable dovetail ways on column
 +
    3/8" and 1/2" collets
 +
    1/2" drill chuck
 +
    Two T-nuts
 +
    Made in an ISO 9001 factory
 +
 +
Specifications:
  
''See also: [[Hosted/10000023 | Taig Mini-Mill]]''
+
    Motor: 3/4 HP, 110V, single-phase
 +
    Spindle taper: MT #3
 +
    T-slots: 2 @ 1-1/8" centers, 7/16" wide
 +
    Head travel: 7-1/2"
 +
    Head tilt: 45° L/R
 +
    Max. distance spindle to table: 11-1/2"
 +
    Swing: 12-3/4"
 +
    Table travel (longitudinal): 7-5/16"
 +
    Table travel (cross): 4"
 +
    Table size: 3-5/8" x 15-3/4"
 +
    Range of speeds: Variable, 0–2500 RPM
 +
    Approximate shipping weight: 149 lbs.
  
The mill we have is a [http://www.grizzly.com/products/Mini-Milling-Machine/G8689 Grizzly G8689 Mini Milling Machine]
+
=== External Links ===
  
 +
* [http://www.grizzly.com/products/Mini-Milling-Machine/G8689 Grizzly G8689 Mini Milling Machine]
 
* [http://cdn0.grizzly.com/manuals/g8689_m.pdf Instruction Manual]
 
* [http://cdn0.grizzly.com/manuals/g8689_m.pdf Instruction Manual]
 
* [http://cdn0.grizzly.com/partslists/g8689_pl.pdf Parts List]  
 
* [http://cdn0.grizzly.com/partslists/g8689_pl.pdf Parts List]  
 
* [http://anivo.com/reed/G8689_cont/g8689_cont.htm Grizzly G8689 mini-mill motor controller repair] (includes schematics)  
 
* [http://anivo.com/reed/G8689_cont/g8689_cont.htm Grizzly G8689 mini-mill motor controller repair] (includes schematics)  
 
* [http://www.grizzly.com/products/g8689/parts Replacement Parts]
 
* [http://www.grizzly.com/products/g8689/parts Replacement Parts]

Revision as of 19:55, 31 December 2014


 

ATX HackerSpace Pages relating to the mini-mill
G8689.jpg
Central Machinery 44991 Manual Mini-Mill
Milling101
Edit this template
Grizzly G8689 Manual Mini-Mill.jpg

This mini-mill is to be used primarily for metal or plastics. Special instructions are needed if using this mill on steel. Please discuss the necessary precautions involving steel as a material with the owner, Andy Darling, if you need to work steel for a project. Do not use on wood.

See also: Taig Mini-Mill

Requires Owner Approval to Become Qualified for Operation

If you would like a class on operating the mill, please contact the owner, Andy Darling. If you are interested in using the lathe and feel you have prior qualifications, you must apply for approval to the owner, Andy Darling.

Features and Specifications

Features:

   Dovetail column
   Safety shut off switch
   Adjustable depth stop
   Fine feed head control
   Geared drive
   Clear guard on spindle
   Rubber chip guards on ways
   Zero setting dials read in inches
   Adjustable dovetail ways on column
   3/8" and 1/2" collets
   1/2" drill chuck
   Two T-nuts
   Made in an ISO 9001 factory

Specifications:

   Motor: 3/4 HP, 110V, single-phase
   Spindle taper: MT #3
   T-slots: 2 @ 1-1/8" centers, 7/16" wide
   Head travel: 7-1/2"
   Head tilt: 45° L/R
   Max. distance spindle to table: 11-1/2"
   Swing: 12-3/4"
   Table travel (longitudinal): 7-5/16"
   Table travel (cross): 4"
   Table size: 3-5/8" x 15-3/4"
   Range of speeds: Variable, 0–2500 RPM
   Approximate shipping weight: 149 lbs.

External Links