Difference between revisions of "Membership Knowledge Base"

From ATXHackerspace

Jump to: navigation, search
(Wood)
(Danny's CNC router)
Line 34: Line 34:
 
FAQ
 
FAQ
  
Z jitter:
+
'''Cleaning'''
That can happen when it jams due to debris in the ways or the leadscrew. Clean the ways, wheels, and leadscrew.
+
Clean the ways, wheels, & leadscrew & re-lube weekly. Z jitter can be caused by debris in the ways. If not that, it can be a worn lead nut.  
It's one thing that can cause stalling.  There are other possible causes
 
Leadnut was worn out- but it's been replaced: mar 20, 2019
 
 
 
 
 
Z jitter tests:
 
The leadscrew and ways were reasonably clean and the leadscrew had some lube.  
 
I cleaned the ways, wheels, and cleaned off the old lube on the leadscrew and re-lubed.
 
 
 
 
 
Sparktech eBay name is drillman1, carbide plus store
 
 
 
  
  
 +
'''Sparktech eBay name'''
 +
drillman1, carbide plus store
  
 
== Wood==
 
== Wood==

Revision as of 16:36, 2 May 2019

Volunteer your skills/knowledge here


Editing Wiki

'Request account' from main page & email martinbogo@gmail.com

Red

Report all problems to facilities@atxhs.org (Danny)

Consistency tests needed.


FAQ


I have a project that has alignment marks on them and wondering if there is a way on the Red laser to move the laser head manually either by the arrows or coordinates so I can check my overlay?

There’s no way to position Red. You can do that with Blue. I do alignment in one of two ways: 1) by laying a sheet of paper on the bed and slicing it with 90% speed. 2) by cutting out a frame jig before hand.

The jig or paper lets me know where to put the item I’m cutting. If I need ~2mm precision, the paper works. Less than that, take the time to build the jig.


'Insufficient flow from air', WTF? Turn on air.

Danny's CNC router

Report all problems to dannym@austin.rr.com


FAQ

Cleaning Clean the ways, wheels, & leadscrew & re-lube weekly. Z jitter can be caused by debris in the ways. If not that, it can be a worn lead nut.


Sparktech eBay name drillman1, carbide plus store

Wood

FAQ

Sawstop weekly cleaning The Sawstop tilt & height can get jammed. It can be cleaned from the access door on the side. Depending on where it is jammed, it may require reaching in & cleaning it by hand.

Miter Saw blockage Turn off the saw, start the dust collector, reach back & pull the debris blocking the dust.

Metal

Joe josephqtn1@gmail.com

Manual Mills Joe Lathe Jay Tormach Mill Eric, Max


Art


Electronics

See ../Groups/DIY Electronics for more information

Casting

Eric aluminum Matthew Goodman


Software/Hardware

  • Python: Gunnar likes to hold classes regularly on data science & robotics topics
  • CAD Drafting and 3D modeling Eric
  • Openscad Rob
  • Arduino Bion, Ryan, Marshall Vaughan
  • Beagle Ryan, Jerry
  • FPGA/steppers Danny
  • Brushless commutation Jerry
  • SQL Crothers
  • GL/gaming Steve Baker
  • Web Steve Baker
  • Get bitched out Jay

Hackerspace Usability Initiative