Injection Molding Machine

From ATXHackerspace

Jump to: navigation, search

 

ATX HackerSpace Pages relating to
Projects
HeathRobinson.jpg
Projects
Wishlist of Needed Actions
Taig Mini-Mill
Injection Molding Machine
Edit this template

Material list:

2 pcs 3/16" x 2-1/2" x 2-1/2" HRS angle, 12" long

1pc 1/8" x 1-1/2" x 1-1/2" HRS angle, 25-1/2" long

1pc 1/8" x 1-1/2" x 1-1/2" HRS angle, 24" long

2 pcs 1/4" x 1-1/2" x 6-1/4" HRS flat bar

1pc 1/4 x 1-1/2 HRS flat bar 8-3/4 long

1pc 3/16 x 2-1/2 x 2-1/2 HRS angle 9-5/8 long

1pc 1/4 x 1-1/2 HRS flat bar 19" long

2pcs 1/4 x 3/4 HRS flat bar 4-1/2 long

2pcs 1/4 CRS round rod, 1" long

1pc 1/2 CRS round rod, 3" long

1pc 1/2 CRS round rod, 7" long

1pc 3/8-16 threaded rod, 4-1/2 long

1pc 1/4 x 3 CRS bar stock 4" long

1pc 3/8-16 nut

1pc 1 x 1-1/2 CRS bar stock 4" long

1pc 1 x 1-1/2 CRS bar stock, 1" long

1pc 1/2" CRS round rod, 1" long

1 100-500 degree oven thermometer

1 250 Watt cartridge heater, 3/8 diameter, 3" long

1 250 to 600 degree adjustable thermostat

1 pc 3/8 CRS round rod, 1-3/4" long

1 5A/120V toggle switch

1 120V indicator light

2ft of 14 gauge, 450 degree centigrade appliance wire

1 6' long, 18 gauge 120V power cord with ground.

2 18-12 porcelain wire nuts

1pc of 1-1/2 x 3-1/8 20 gauge sheet metal

1pc of 3-3/8 x 7 20 gauge sheet metal

1pc of 2-3/4 x 10 20 gauge sheet metal

1pc of 3 x 10-1/2 20 gause sheet metal


screws, nuts, etc.